I have a question about updating my pc, and I was wondering if you could give me some help. I wanted to know wether this would work:
VERRE SERIES PC CASE IN STYLISH SILVER FINISH WITH BLUE TINT
DDR DIMM - 512 MB RAM, 184 PIN, 266 MHz / PC 2100, SYNCHRONOUS
CPU, INTEL, PENTIUM 4, 2.4GHz / 512K / 533FSB (2400MHz), SOCKET 478, 32K, 512K
and lastly a motherboard that SR don't sell
A Giga Byte 8GE667
> do the blocks at the end of the cables have any writing on them? if
> not then as a general rule the power on switch is orange\white cables,
> reset switch is blue\white, hdd LED is red\while, power LED is
> green\white and the front internal speaker is black\red, but this can
> vary widely on differant cases, see what colour you have and give us a
> shout bakc.
The colours work.
> You have to either read the manual (if you don't have one then
> download it from the motherboard manafacturers site) or most newer
> motherboard actually have it writen around the pins themselfs, there
> are loads of differant ways of setting this up.
I know which are which on the motherboard, but not which cables are which coming from the case.
It's my Birthday!
> Sure is.
Is this right?