The "Freeola Customer Forum" forum, which includes Retro Game Reviews, has been archived and is now read-only. You cannot post here or create a new thread or review on this forum.
Bought an ASUS AX800Pro TVD the other week and have successfully flased it to X800XT PE
Clock before: 475/900
Clock After: 520/1120
Pipes before: 12
Pipes after: 16
Chuffed as hell!;)
Clock before: 475/900
Clock After: 520/1120
Pipes before: 12
Pipes after: 16
Chuffed as hell!;)
Page:
I may try the old pencil volt mod.
Yeah it is a genuine XT PE.
tigamilla wrote:
> A-X-K
>
> Is yours a modded Pro card or a purpose bred XT?
His is a genuine XT PE.
> A-X-K
>
> Is yours a modded Pro card or a purpose bred XT?
His is a genuine XT PE.
A-X-K
Is yours a modded Pro card or a purpose bred XT?
Is yours a modded Pro card or a purpose bred XT?
From my experience it is the memory clock that causes instability more so than the GPU. I have the CPU clocked from stock 520 to 574 and the memory from 560 to 600 at the moment which seems to run okay on the whole. If I go slightly more with the memory I just get constant crashes but if I go more with GPU I get display corruption.
This is with the replacement of the standard cooler for the new Arctic Cooler Rev 4 with the memory heatsink plate and exhaust fan.
It also helped replacing the standard heatsink paste with Arctic Silver 5 which I did last week. Doesn't allow MASSIVE overclocking with it but I can certainly get the bit more without getting serious display corruption.
If you want to go that bit further I would grab the Arctic Cooler and some Silver 5, it does a cracking job.
This is with the replacement of the standard cooler for the new Arctic Cooler Rev 4 with the memory heatsink plate and exhaust fan.
It also helped replacing the standard heatsink paste with Arctic Silver 5 which I did last week. Doesn't allow MASSIVE overclocking with it but I can certainly get the bit more without getting serious display corruption.
If you want to go that bit further I would grab the Arctic Cooler and some Silver 5, it does a cracking job.
cookie monster wrote:
> Tyla wrote:
> So am I right in thinking it's just the clock speeds causing
> instability
>
> It was for me anyway.
same here, I think the cards definately need volt modding; upping the core seems to cause a power deficiency and instability.
eg: 520/560 = big no no although temps seem ok.
508/569 = No problems, decent temps.
> Tyla wrote:
> So am I right in thinking it's just the clock speeds causing
> instability
>
> It was for me anyway.
same here, I think the cards definately need volt modding; upping the core seems to cause a power deficiency and instability.
eg: 520/560 = big no no although temps seem ok.
508/569 = No problems, decent temps.
Tyla wrote:
> So am I right in thinking it's just the clock speeds causing
> instability
It was for me anyway.
> So am I right in thinking it's just the clock speeds causing
> instability
It was for me anyway.
ßulle†† wrote:
> Cheers. Do they do any sort of Finance? I'm not exactly able to fork
> out the full value right now.
>
> I can't seem to find any mention on their site either
Don;t think so, instead try DABS, they offer finance.
> Cheers. Do they do any sort of Finance? I'm not exactly able to fork
> out the full value right now.
>
> I can't seem to find any mention on their site either
Don;t think so, instead try DABS, they offer finance.
cookie monster wrote:
> Tyla wrote:
> Screen goes black, little flicker of Blue lines,
> screen comes back, PC locks, Screen goes black again, Card fails and
> have to reboot. Not too chuffed.
>
> I got something similar, had to go back down to pro clocks, im
> waiting for a nice waterblock to come along before i go back to the
> more aggressive clocks of the XT.
So am I right in thinking it's just the clock speeds causing instability as Ihave read that it may be the RAM timings being different as well as the Voltage difference.
If it's justthe Clocks, I may give it a go. General advice it to underclock anyway.
> Tyla wrote:
> Screen goes black, little flicker of Blue lines,
> screen comes back, PC locks, Screen goes black again, Card fails and
> have to reboot. Not too chuffed.
>
> I got something similar, had to go back down to pro clocks, im
> waiting for a nice waterblock to come along before i go back to the
> more aggressive clocks of the XT.
So am I right in thinking it's just the clock speeds causing instability as Ihave read that it may be the RAM timings being different as well as the Voltage difference.
If it's justthe Clocks, I may give it a go. General advice it to underclock anyway.
Tyla wrote:
> Screen goes black, little flicker of Blue lines,
> screen comes back, PC locks, Screen goes black again, Card fails and
> have to reboot. Not too chuffed.
I got something similar, had to go back down to pro clocks, im waiting for a nice waterblock to come along before i go back to the more aggressive clocks of the XT.
> Screen goes black, little flicker of Blue lines,
> screen comes back, PC locks, Screen goes black again, Card fails and
> have to reboot. Not too chuffed.
I got something similar, had to go back down to pro clocks, im waiting for a nice waterblock to come along before i go back to the more aggressive clocks of the XT.
Page: