The "Freeola Customer Forum" forum, which includes Retro Game Reviews, has been archived and is now read-only. You cannot post here or create a new thread or review on this forum.
Going to buy some small cheap effective computer stuff that won’t cost a lot. So this is what I have in mid so far.
Cable Sleeving kit
10 ft. - 1/8" sleeving
10 ft. - 1/4" sleeving
5 ft. - 3/8" sleeving
5 ft. - 1/2" sleeving
10 - tie wraps
1 ft. - 9mm Heatshrink Tubing
1 ft. - 20mm Heatshrink Tubing
6 in. - 25mm Heatshrink Tubing
Do you think it will be an adequate amount?
Akasa System Exhaust Blower
I will pop it the PCI slot underneath my graphics card, until I find the courage to fit an arctic cooling unit, after my CPU incident.
Akasa AK-171 Copper RAM Heat sinks.
Now I’m not sure if I order that I will get 2, I can’t make it out from the description.
"Featuring ShinEtsu thermal interface pads the AK-171 has two heavy copper heat spreaders to provide much improved cooling over standard aluminium RAM heatsinks."
Zalman ZM-RHS1 Silent VGA RAM Heatsink Kit
For the ram of my graphics card.
And a rounded IDE and floppy cable.
So suggest me some more stuff. At the moment all that will cost £50, that’s if I have to order two heat spreaders.
Cable Sleeving kit
10 ft. - 1/8" sleeving
10 ft. - 1/4" sleeving
5 ft. - 3/8" sleeving
5 ft. - 1/2" sleeving
10 - tie wraps
1 ft. - 9mm Heatshrink Tubing
1 ft. - 20mm Heatshrink Tubing
6 in. - 25mm Heatshrink Tubing
Do you think it will be an adequate amount?
Akasa System Exhaust Blower
I will pop it the PCI slot underneath my graphics card, until I find the courage to fit an arctic cooling unit, after my CPU incident.
Akasa AK-171 Copper RAM Heat sinks.
Now I’m not sure if I order that I will get 2, I can’t make it out from the description.
"Featuring ShinEtsu thermal interface pads the AK-171 has two heavy copper heat spreaders to provide much improved cooling over standard aluminium RAM heatsinks."
Zalman ZM-RHS1 Silent VGA RAM Heatsink Kit
For the ram of my graphics card.
And a rounded IDE and floppy cable.
So suggest me some more stuff. At the moment all that will cost £50, that’s if I have to order two heat spreaders.
What I was thinking, would be quite pointless, me just buying one. After this I’m thinking of getting an icematt and that new Razor mouse. Then that’s my PC finished until June when I go 64, 939 and SLI. Will bring tears to any true geek.
poopots wrote:
> Akasa AK-171 Copper RAM Heat sinks.
> Now I’m not sure if I order that I will get 2, I can’t make it out
> from the description.
> "Featuring ShinEtsu thermal interface pads the AK-171 has two
> heavy copper heat spreaders to provide much improved cooling over
> standard aluminium RAM heatsinks."
I'm going to take a wild guess, but I'd say that was for each side of the RAM :)
> Akasa AK-171 Copper RAM Heat sinks.
> Now I’m not sure if I order that I will get 2, I can’t make it out
> from the description.
> "Featuring ShinEtsu thermal interface pads the AK-171 has two
> heavy copper heat spreaders to provide much improved cooling over
> standard aluminium RAM heatsinks."
I'm going to take a wild guess, but I'd say that was for each side of the RAM :)
Going to buy some small cheap effective computer stuff that won’t cost a lot. So this is what I have in mid so far.
Cable Sleeving kit
10 ft. - 1/8" sleeving
10 ft. - 1/4" sleeving
5 ft. - 3/8" sleeving
5 ft. - 1/2" sleeving
10 - tie wraps
1 ft. - 9mm Heatshrink Tubing
1 ft. - 20mm Heatshrink Tubing
6 in. - 25mm Heatshrink Tubing
Do you think it will be an adequate amount?
Akasa System Exhaust Blower
I will pop it the PCI slot underneath my graphics card, until I find the courage to fit an arctic cooling unit, after my CPU incident.
Akasa AK-171 Copper RAM Heat sinks.
Now I’m not sure if I order that I will get 2, I can’t make it out from the description.
"Featuring ShinEtsu thermal interface pads the AK-171 has two heavy copper heat spreaders to provide much improved cooling over standard aluminium RAM heatsinks."
Zalman ZM-RHS1 Silent VGA RAM Heatsink Kit
For the ram of my graphics card.
And a rounded IDE and floppy cable.
So suggest me some more stuff. At the moment all that will cost £50, that’s if I have to order two heat spreaders.
Cable Sleeving kit
10 ft. - 1/8" sleeving
10 ft. - 1/4" sleeving
5 ft. - 3/8" sleeving
5 ft. - 1/2" sleeving
10 - tie wraps
1 ft. - 9mm Heatshrink Tubing
1 ft. - 20mm Heatshrink Tubing
6 in. - 25mm Heatshrink Tubing
Do you think it will be an adequate amount?
Akasa System Exhaust Blower
I will pop it the PCI slot underneath my graphics card, until I find the courage to fit an arctic cooling unit, after my CPU incident.
Akasa AK-171 Copper RAM Heat sinks.
Now I’m not sure if I order that I will get 2, I can’t make it out from the description.
"Featuring ShinEtsu thermal interface pads the AK-171 has two heavy copper heat spreaders to provide much improved cooling over standard aluminium RAM heatsinks."
Zalman ZM-RHS1 Silent VGA RAM Heatsink Kit
For the ram of my graphics card.
And a rounded IDE and floppy cable.
So suggest me some more stuff. At the moment all that will cost £50, that’s if I have to order two heat spreaders.